
KUL series
CC Independent dimmable driver

Features
·Isolated 1-10V/10V PWM/Rx dimming interface
·Loop-in and loop-out wiring without junction box
·10-level current output can be realized through external DIP-switch,easier to adjust the luminaire power
·Soft dimming and flicker-free at any brightness,meets the new requirements of ErP certification
·Using HPC patented technology at any dimming level,the brightness between lights is same
·Standby power input<0.5W,meets the ErP requirements of new certification
·High PF,high efficiency,low THD
·Screw-free and pressing type strain relief,easier install
·Independent input and output strain relief,stronger wiring
·Supports 0.75-2.5mm² input wires,stronger wiring
·SELV and Class || design, suitable for use side of the light
·Passed ENEC-TUV,CE,RCM,CCC,UKCA and other certifications

Parameters
Model | Input voltage | Output power | Output voltage | Output current | PF | Efficiency | THD | Ta | Tc | Weight(g) | Dimension(mm) |
BK-KUL030-0800Am | 200-240VAC | 30.4W | 24V - 42V | 0.35-0.8A | 0.95 | 87% | 10% | 45℃ | 80℃ | 140 | L103*W68.5*H31 |
BK-KUL040-1050Am | 200-240VAC | 40.0W | 24V - 42V | 0.60-1.05A | 0.95 | 88% | 10% | 45℃ | 90℃ | 140 | L103*W68.5*H31 |
BK-KUL050-1300Am | 200-240VAC | 49.4W | 24V - 42V | 0.85-1.30A | 0.95 | 88% | 10% | 45℃ | 80℃ | 195 | L123*W78.5*H31 |
BK-KUL060-1650Am | 200-240VAC | 62.7W | 24V - 42V | 1.20-1.65A | 0.95 | 89% | 10% | 45℃ | 90℃ | 216 | L123*W78.5*H31 |
Suffix m=Isolated 1-10V/10V PWM/Rx
Specifications
Item | Parameter |
Rated input voltage | 200-240VAC/200-240VDC |
Limited voltage | 180-264VAC/180-264VDC |
Input votage shock | 380V |
Protection type | Class || |
Output type | SELV |
Output current accuracy | 5% |
Dimming range | 5-100% |
Power on time | <0.5s |
Standby powe | <0.5W |
No load output voltage | 50V |
Surge | L-N:2KV |
Flicker-free | Pst LM <1,SVM <0.4 |
Operation temperature | -20°C-+45°C |
Protection class | IP20 |
Life time | Normal 100,000 hours |
Warranty | 5 years |
Dimension

Wiring diagram
Suffifix m=1-10V/10V PWM/Rx

KUL series suffix m (1-10V(Dual input) V1.3
KUL series suffix m (1-10V(Single input) V1.3