

MUL series
CC Independent dimmable driver
Features
·Isolated 1-10V/10V PWM/Rx dimming interface
·10-level current output can be realized through external DIP-switch,easier to adjust the luminaire power
·Soft dimming and flicker-free at any brightness,meets the new requirements of ErP certification
·Using HPC patented technology,at any dimming level,The brightness of the lights is the same
·Standby power input <0.5W,meets the ErP requirements of new certification
·High PF,high efficiency,low THD
·Screw-free and pressing type strain relief,easier install
·Independent input and output strain relief,stronger wiring
·Supports 0.75-1.5mm2 input wires,stronger wiring
·SELV and Class II design, suitable for use side of the light
·Compliance with CE,UKCA,EMEC,EL and other certifications


Parameters
Model | Input voltage | Output power | Output voltage | Output current | PF | Efficiency | THD | Ta | Tc | Dimension(mm) |
BK-MUL010-0350Am | 200-240VAC | 11W | 24-42V | 0.1-0.35A | 0.96 | 83% | 7% | 60°C | 90°C | L117*W45.5*H24 |
BK-MUL022-0600Am | 200-240VAC | 23.1W | 24-42V | 0.225-0.6A | 0.97 | 85.5% | 8% | 45°C | 90°C | L117*W45.5*H24 |
Suffix m:Isolated 1-10V/10V PWM/Rx
Specifications
Item | Parameter |
Rated input voltage | 200-240VAC/200-240VDC |
Limited voltage | 180-264VAC/180-264VDC |
Input votage shock | 380V |
Protection type | Class || |
Output type | SELV |
Output current accuracy | 5% |
Dimming range | 1-100% |
Power on time | <0.5s |
Standby powe | <0.5W |
No load output voltage | 60VDC |
Surge | L-N:2KV |
Flicker-free | Pst LM <1,SVM <0.4 |
Operation temperature | -20°C-60°C |
Protection class | IP20 |
Life time | Normal 100,000 hours |
Warranty | 5 years |
Dimension(unit:mm)

Wiring diagram
Suffix m=Isolated 1-10V/10V PWM/Rx
